Sturdy Wooden Gate is high enough to contain small pets yet low enough for pet owners to step over. Attractive vertical slat design features 1 1/2" spacing between slats. Pressure-mounted gate installs easily without hardware or tools and will not mar walls or doorframes. Opens by pullling handle locks securely on top and bottom. Convenient door with spring-loaded pull latch allows you to give pet easy access without moving gate. Walk Over Wooden Gate comes attractively boxed for easy retail.
Adjusts to fit openings 30"-44" wide and measures 18"H.
View the instructions Document
DETAILED INSTRUCTIONS
- Loosen the small knobs in the middle of the gate and adjust proper width to fit in doorway.
- Once adjusted to fit as tightly as possible in opening, tighten small knobs in the middle of the gate to lock it in place. The photo below shows the upper knob, and there is a second one directly below it, on the bottom frame.

3. Adjust knobs on side bumpers to further tighten tension and stabilize in opening.

The threaded posts on the bumpers themselves may be loose in the holes drilled in the wood frame. This is not a defect, and has no effect on the installation of the gate. When the larger knobs are tightened, the bumpers will extend out from the gate, putting more pressure on the door frame, stabilizing the gate in the opening.
VIEW ALL PRODUCTS BY Four Paws |