Home > Grooming > Grooming Equipment > Clippers & Blades >

  Andis UltraEdge Blade Size 9 5/64" Cut (AD64120)
  Andis UltraEdge Blade Size 9 564
 
List Price: $25.95
Our Price: $23.87
You Save $2.08!


Product Code: RP-600153
Qty:


Description
 
Andis® UltraEdge™ blades are made from high-carbon steel and processed through a unique carborizing heat treatment that actually adds carbon to the metal. More carbon on the metal means a harder cutting surface. Blades hold a razor sharp edge that will endure prolonged use and more sharpening treatments.

Each Andis UltraEdge blade is sharpened to exact quality standards and is hand-tested before it is shipped. Blades have a Rockwell Hardness rating of 65. Fit Andis®, Conair®, Oster®, and Wahl® detachable-style clippers. Size 9 Blade has a 5/64" blade cut (2.0 mm).

Use on terrier, springer and schnauzer backs. This blade leaves a lovely finish on the crown of the head and the arch of the neck of a cocker spaniel. It can also be used effectively on the cheeks and front of the neck of a sensitive poodle.

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal's coat. If the clipper blades leave streaks or slow down, it's a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.

VIEW ALL PRODUCTS BY Andis
 

Related Products...
Oster CryogenX-AgION Blade Size 10 116" Cut (OS86
Our Price: $28.47
Add
Oster CryogenX-AgION Blade Size 10 116
Oster Zerion Blade Size 40 1100" Cut (OS78940)
Our Price: $34.91
Add
Oster Zerion Blade Size 40 1100
Andis UltraEdge Blade Size 58 132" Cut (AD64960)
Our Price: $32.15
Add
Andis UltraEdge Blade Size 58 132
Oster Cryogen-X AgION Blade Size 58 (OS86858)
Our Price: $32.15
Add
Oster Cryogen-X AgION Blade Size 58 (OS86858)
Oster Zerion Blade Size 15 364" Blade Cut (OS7891
Our Price: $34.91
Add
Oster Zerion Blade Size 15 364


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Grooming > Grooming Equipment > Clippers & Blades
Grooming > Grooming Equipment
Grooming
Grooming > Grooming Tools > Clippers & Blades
Grooming > Grooming Tools