Home > Grooming > Grooming Equipment > Clippers & Blades >

  Andis CeramicEdge Blade Size 5FC 1/4" Cut (AD56155)
  Andis CeramicEdge Blade Size 5FC 14
 
List Price: $37.95
Our Price: $34.16
You Save $3.80!


Product Code: RP-600136
Qty:


Description
 
The high-quality ceramic cutters on these blades stay sharper longer and require less sharpening than standard steel blades. The low heat transfer and friction index of ceramic keeps blades running 50% cooler than steel. You'll use less coolant and clip faster with less downtime for increased productivity. Because ceramic blades do not heat up, they reduce the risk of friction burns. Steel combs have a Rockwell Hardness of 65. Compatible with Andis®, Conair®, Oster®, and Wahl® detachable clippers.

Size 5FC blade has a 1/4" (6.2 mm) blade cut. This is a full cut blade used as a finishing blade for a Size 5 Skip-Tooth Blade, and for body work on many breeds, including terriers, poodles and sporting dogs.

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal's coat. If the clipper blades leave streaks or slow down, it's a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.

VIEW ALL PRODUCTS BY Andis
 

Related Products...
Andis CeramicEdge Blade Size 7 Skip-Tooth 18" Cut
Our Price: $32.36
Add
Andis CeramicEdge Blade Size 7 Skip-Tooth 18
Andis 220-Volt AGC Super 2-Speed Clipper (AD23145)
Our Price: $188.96
Add
Andis 220-Volt AGC Super 2-Speed Clipper (AD23145)
Oster CryogenX-AgION Blade Size 3 (OS86803)
Our Price: $38.66
Add
Oster CryogenX-AgION Blade Size 3 (OS86803)
Andis UltraEdge Blade Size T-84 316" Cut (AD21641
Our Price: $30.56
Add
Andis UltraEdge Blade Size T-84 316
Andis AGC 2-Speed Clipper 220-Volt (AD22610)
Our Price: $175.46
Add
Andis AGC 2-Speed Clipper 220-Volt (AD22610)


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Grooming > Grooming Equipment > Clippers & Blades
Grooming > Grooming Equipment
Grooming
Grooming > Grooming Tools > Clippers & Blades
Grooming > Grooming Tools