Home > Grooming > Grooming Equipment > Clippers & Blades >

  Andis CeramicEdge Blade Size 35 3/50" Cut (AD56135)
  Andis CeramicEdge Blade Size 35 350
 
List Price: $32.95
Our Price: $29.66
You Save $3.30!


Product Code: RP-600132
Qty:


Description
 
Andis® CeramicEdge™ blades feature high-quality ceramic cutters that stay sharper longer and require less sharpening than standard steel blades. The low heat transfer and friction index of ceramic keeps blades running 50% cooler than steel. You'll use less coolant and clip faster with less downtime for increased productivity. Because ceramic blades do not heat up, they reduce the risk of friction burns. Steel combs have a Rockwell Hardness of 65.

Compatible with Andis®, Conair®, Oster®, and Wahl® detachable clippers. Size 35 CeramicEdge Blade has a 3/50" blade cut. See the Instructions tab for additional tips on care and use.

Blade sets should be oiled once a day minimum! Ideally, it should be done before every grooming. After oiling, be sure to use a soft, dry cloth to wipe any oil off the external surfaces to reduce the possibility of getting it on the animal's coat. If the clipper blades leave streaks or slow down, it's a sure sign that the blades need oil.

Oiling Blades: Place a few drops of blade oil on the front and side of the cutter blades. Wipe excess oil off blades with a soft, dry cloth. Spray lubricants contain insufficient oil for good lubrication, but are an excellent clipper blade coolant.

Cleaning Blades: Immerse blades only while clipper is running in a shallow pan of clipper oil or blade cleaner. After cleaning, turn the clipper off and dry blades with a clean, dry cloth. If blades will still not cut, there may still be some hair trapped between the upper and lower blade. Remove the blade off the clipper and slide the upper blade to one side without loosening the tension spring or moving the upper blade completely out from under the tension spring. Wipe the surfaces of the blades clean with a dry cloth, then place a drop of clipper oil where the upper and lower blades meet and also in the guide slot of the tension spring.

Always replace broken or nicked blades to prevent injury.

VIEW ALL PRODUCTS BY Andis
 

Related Products...
Oster Power Pro Ultra Replacement Charging Stand (
Our Price: $171.86
Add
Oster Power Pro Ultra Replacement Charging Stand (
Andis CeramicEdge Blade Size 5FC 14" Cut (AD56155
Our Price: $34.16
Add
Andis CeramicEdge Blade Size 5FC 14
Andis UltraEdge Blade Size 58 132" Cut (AD64960)
Our Price: $31.46
Add
Andis UltraEdge Blade Size 58 132
Oster Cryogen-X AgION Blade Size 7 Skip-Tooth 18"
Our Price: $31.46
Add
Oster Cryogen-X AgION Blade Size 7 Skip-Tooth 18
Andis CeramicEdge Blade Size 10 116" Cut (AD56110
Our Price: $29.66
Add
Andis CeramicEdge Blade Size 10 116


 Share your knowledge of this product with other customers... Be the first to write a review.



Browse for more products in the same category as this item:

Grooming > Grooming Equipment > Clippers & Blades
Grooming > Grooming Equipment
Grooming
Grooming > Grooming Tools > Clippers & Blades
Grooming > Grooming Tools